Pressure machines often require product switching and mold replacement during the production process. Due to the large weight and volume of the molds, it is difficult, time-consuming, and inefficient to replace them. Ho...

When the requirements for mold changing time are very strict, a mold changing trolley can be used to change molds on both sides of the punch press, which will greatly shorten the mold changing time and achieve high auto...

Maintenance of rapid mold change system for die-casting machine: (1) Conduct a thorough cleaning of the machine; (2) Clean the filter element; (3) Check if the gap between the large bar and the guide sleeve is normal, a...

The rapid mold change system for injection molding machines has been widely used in the home appliance, electronics, and automotive industries for parts processing. Due to the application of the rapid mold change system...

Please be aware of the following before operating this device for mold replacement: 1. The mold size shall not be smaller than the minimum mold size specified in the drawing.

Can large molds be held in place? The magnetic template uses neodymium iron boron, a rare earth permanent magnet material with high magnetic energy product, as the latest result of the development of rare earth permane...