The rapid mold change system for injection molding machines has been widely used in the home appliance, electronics, and automotive industries for parts processing. Due to the application of the rapid mold change system, factories can accept small and multi batch orders. So what are the advantages of the rapid mold change system for injection molding machines?
1) Easy to install, no need to change the appearance of the injection molding machine, and no need to drill holes on the injection molding machine. Simply fix the dedicated disk to the threaded hole or T-shaped slot on the back plate of the injection molding machine with bolts and it can be used;
2) High safety factor, the rapid mold changing system only requires a very short period of charging and demagnetization action during mold changing, and does not require power supply during normal use. The magnetic force is strong, and it does not disappear or decrease with time and temperature, making it both economical and safe;
3) The use of a quick mold changing system can greatly improve mold changing efficiency and reduce mold changing time. Generally, mold changing and clamping operations for injection molding machines only take three minutes, and mold changing for extra large molds only takes about ten minutes;
4) The thickness of this dedicated disk is about 5-6cm, occupying a small space and not affecting the mold opening space of the injection molding machine;
5) Easy to operate, any non professional personnel only need about 1 minute of training to proficiently operate.